Force-Gauge.net - Quality force testing and torque testing products and materials testing equipment
Contact UsYour AccountYour CartHome
Force Gauges
Torque Testing
Test Stands
Grips & Accessories
Software
 
Chatillon
Dillon-Quantrol
Hoto Instruments
Imada
Lafayette Instruments
Mark-10
Shimpo
 
Show Cart
Contact Us
Home
 
 
 
 
 
 
 
Mark-10 WT3-201M Wire Crimp Pull Tester
Authorized Dealer
The WT3-200 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).

Specifications Chart

Mark-10 WT3-201M Wire Crimp Pull Tester

Price: $2085.25


Mark-10 WT3002 Ring terminal fixture for WT3-200 or WT3-201M, add $185.25

Mark-10 WT3003 Machinable blank terminal fixture for WT3-200 or WT3-201M, add $166.25

Mark-10 WT3001 Carrying case for WT3-200, add $237.50

Mark-10 AC1049 Calibration fixture for WT3-200 / WT3-201M (weights not included), add $807.50

View Spec Cart

The WT3-200 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).

A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force.

On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes.

An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe.

  • Measures real-time and peak force values
  • Ergonomic lever operation produces 200 lbF [1,000 N]
  • USB, RS-232, Mitutoyo (Digimatic), and analog outputs
  • Automatic output / data storage / zeroing upon sample break helps automate testing processes
  • 1,000-point data memory with statistics and outputs
  • Password protection prevents unauthorized changes
  • Programmable set point indicators and outputs for pass/ fail determination
  • High-speed 7,000 Hz sampling rate accurately captures peak force values
  • Configurable audio alarms and key tones
  • Mounting holes for bench mounting
  • CE mark
Key Features

Adjustable wire terminal fixture accommodates wire diameter sizes up to 0.25 in (6.3 mm)

Ergonomic lever easily applies force and releases the sample.

Unique knurled cam design effectively secures and pulls the loose end of the sample
Model WT3-200
0
$2,085.25
buy now
Force Capacity 200 x 0.1 lbF, 3200 x 2 ozF, 100 x 0.05 kgF, 1000 x 0.5 N, 1 x 0.0005 kN
Accuracy ±0.2% of full scale
Wire gauge range AWG30 - AWG3
Wire dia. range 0.01 - 0.25 in [0.3 - 6.3 mm]
Sample length range Minimum 7.50 in [191.0 mm], excluding termination, unlimited length
Maximum sample elongation 1.15 in [29.2 mm]
Power AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Sampling Rate 7,000 Hz
Outputs USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC at capacity, ±0.25% of full scale.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload 150% of full scale (display shows "OVER" at 110% and above)
Weight 16.0 lb [7.3 kg]
Included items Universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESURTMLite software, MESURTMgauge DEMO software, and user's guide), NIST-traceable certificate of calibration
Warranty 3 years (see individual statement for further details)
dims

Home | Site Map | Shopping Cart | Store Policies | Your Account

©2002-2017 Force-Gauge.net, All rights reserved
Email sales@force-gauge.net with questions about the products