MH-220BA (Basic Type)
MH-220AC (Auto Cycle Type)
- Max Load: 220 lbs
- Stroke: 16"
- Optional dynamic and static distance meter available
Features
Speed Configurations
| Standard Speed |
0.4 ~4" / min |
| Optional High Speed |
0.8 ~ 8 " / min |
| Optional Low Speed |
0.2 ~ 2 " / min |
Optional Data Buttons and Data
Software
Imada DB-Series data input buttons work with Imada
SW software to automate data collection from Imada force
or torque gauges. Enter peak measurements into the spreadsheet
and "zero" the gauge with a touch of the button.
Minimize computer time and mouse usage
Click here for more info...
Imada motorized test stands offer consistent and reliable
testing. Our Basic or Auto Cycle models are available in
Standard, High, and Low speeds. They accept any of the standard
range Imada force gauges and special attachments. Optional
dynamic and static distance meters are also available
Basic Models: MH-220BA
Basic Models have top and bottom travel limits that can
be adjusted for a precise range of movement. Set the travel
limits, flip the direction switch up to move the cross head
up to the top travel limit at the selected speed. Flip the
direction switch down to send the cross head down to the
bottom travel limit. The speed is set by a Speed Adjust knob.
Quick Return and Emergency Stop features are also included.
Auto Cycle Models: MV-220AC
Auto cycle models have top and bottom travel limits that
can be adjusted for a precise range of movement. Speed Adjust,
Quick Return and Emergency Stop features are also included.
These stands have three function modes
- Manual Mode
While the Direction switch is held up, the head moves up. Holding the switch
down moves the cross head down. When the switch is released the head stops.
This mode is ideal for positioning.
- Single Cycle Mode
When the Direction switch is pushed up, the cross head moves up at the desired
speed, and when it reaches the top travel limit, it automatically goes
back and stops at the bottom travel limit, completing one cycle. Pushing
the switch down runs the cycle in reverse.
- Auto Cycle Mode
This mode is similar to Single Cycle mode, except that the cross head travels
up and down repeating the cycle until either the Power or Emergency switches
is turned off. This mode is ideal for applications such as fatigue testing.
Top |
