Force-Gauge.net - Quality force testing and torque testing products and materials testing equipment
Contact UsYour AccountYour CartHome
Force Gauges
Torque Testing
Test Stands
Grips & Accessories
Software
 
Chatillon
Dillon-Quantrol
Hoto Instruments
Imada
Lafayette Instruments
Mark-10
 
Show Cart
Contact Us
Home
 
 
 
 
 
 
 
Mark-10 EG Digital Force Gauges
Mark-10 >> Force Gauges >> Digital Force Gauges

Mark 10 EG Digital Force Gauges
Compare Mark-10 Force Gauges
Click here

Mark 10 BG Digital Force Gauges
Shipping Weight: 10 lbs
currently in stock
estimate shipping cost
FREE UPS Ground Shipping with ANY Mark-10 Purchase!
(48 continental US states only)

Model:   

Cable, BG/CG/EG/BGI to Mitutoyo SPC (09-1047), Add $71
Cable, BG/CG/EG/BGI to RS-232, 25-pin (09-1048), Add $71
Cable, BG/CG/EG/BGI to RS-232, 9-pin (09-1048A), Add $71
Cable, set point, BG/BGI/CG to test stand (09-1090), Add $137
Hi / Lo limits indicator for BG/BGI/CG (11-1022), Add $85
Overload protection module, BG/CG/EG/BGI to test stand (11-1042), Add $185
Output option for EG (RS232, Mitutoyo, Analog) (EGRS), Add $142

FREE UPS Ground Shipping with any Mark-10 purchase!The Mark-10 EG force gauge is an ideal solution for compression and tension applications requiring accuracy and flexibility in the entire 0.12 lb to 500 lb range. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.

Features:

  • Compatible with all Mark 10 test stands and grips
  • Selectable units of measurement
  • Programmable default configuration
  • Peak memory for tensile and compressive forces
  • Push-button calibration
  • Battery or AC operation
  • Programmable automatic shutoff
  • Permanent configuration memory
  • Optional RS-232, Mitutoyo and analog outputs
  • Reversible aluminum housing for handheld use or test stand mounting (see below)
  • Same housing size for all capacities

Specifications:

  • Accuracy: ± 0.3% of full scale ±1 digit
  • Sampling rate: 30 readings/sec
  • Safe overload: 150% of capacity
  • Battery life: 8-10 hours per charge
  • Weight: 0.9 lbs (0.4 kg)
  • Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
  • Warranty: 3 years

Mark 10 EG Digital Force Gauges

Mark-10 EG force gauges are supplied in a cushioned carrying case with AC adapter, rechargeable battery, hook, flat, user's manual, and NIST-traceable certificate of calibration

Mark 10 EG Digital Force Gauges
The Mark 10 EG force gauge is compatible with all Mark-10 force measurement test stands. It is shown here in a compression testing application, mounted to an ES30 test stand with optional items: digital travel display and extension rod

Reversible Housing - A Mark-10 Exclusive

All Mark-10 force gauges have reversible housings that allow the user to use the gauge with the load cell shaft pointing up or down, without the inconvenience of upside-down buttons and display. The housing for Mark-10 BG and Series EG gauges is reversible by separating the two halves and reassembling them with just one connector - an extra bit of engineering that will make your testing setups quicker and more efficient.

Mark 10 BG Digital Force Gauges

 

Optional Equipment:

  • A wide range of test stands and gripping fixtures
  • Outputs package - RS-232, Mitutoyo, and analog outputs. Available at time of purchase or as an upgrade.
  • Overload protection module - Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands.
  • Output cable - Send test data to a PC, statistical printer, or other data collector for further analysis.

 

Model Capacity x resolution Price
EG012 0.12 x 0.0001 lb, 50 x 0.05 gF, 0.5 x 0.0005 N, 110V $755
EG025 0.25 x 0.0002 lb, 100 x 0.1 gF, 1 x 0.001 N, 110V $755
EG05 0.5 x 0.0005 lb, 250 x 0.2 gF, 2.5 x 0.002 N, 110V $755
EG2 2 x 0.002 lb, 1 x 0.001 kgF, 10 x 0.01 N, 110V $660
EG5 5 x 0.005 lb, 2.5 x 0.002 kgF, 25 x 0.02 N, 110V $660
EG10 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V $660
EG20 20 x 0.02 lb, 10 x 0.01 kgF, 100 x 0.1 N, 110V $660
EG50 50 x 0.05 lb, 25 x 0.02 kgF, 250 x 0.2 N, 110V $660
EG200 200 x 0.2 lb, 100 x 0.1 kgF, 1000 x 1 N, 110V $755
EG500 500 x 0.5 lb, 250 x 0.2 kgF, 2500 x 2 N, 110V $755
Optional Equipment
EGRS Output option for EG (RS232, Mitutoyo, Analog) 142
09-1047 Cable, EG/EG/EG/EGI to Mitutoyo SPC (requires EGRS) $71
09-1048 Cable, EG/EG/EG/EGI to RS-232, 25-pin (requires EGRS) $71
09-1048A Cable, EG/EG/EG/EGI to RS-232, 9-pin (requires EGRS) $71
09-1090 Cable, set point, EG/EGI/EG to test stand $137
11-1042 Overload protection module, EG/EG/EG/EGI to test stand $185

 

Dimensions:

Model ØA B C Thread
EG012-EG-200
0.2 (5.8)
0.19 (4.8
0.35 (8.9)
#10-32
EG500
0.312 (7.9)
0.44 (11.2)
0.60 (15.2)
5/16-18

 

Mark 10 EG Digital Force Gauges

Top


Home | Site Map | Shopping Cart | Store Policies | Your Account

Force-Gauge.net - an Itin Scale Company
4802 Glenwood Rd.
Brooklyn, NY  11234
Phone: (718) 336-5900
For orders phone 800-832-0055
FAX: (718) 627-1313


©2002-2016 Force-Gauge.net, All rights reserved
Email sales@force-gauge.net with comments or questions about this site