Force-Gauge.net - Quality force testing and torque testing products and materials testing equipment
Contact UsYour AccountYour CartHome
Force Gauges
Torque Testing
Test Stands
Grips & Accessories
Software
 
Chatillon
Dillon-Quantrol
Hoto Instruments
Imada
Lafayette Instruments
Mark-10
 
Show Cart
Contact Us
Home
 
 
 
 
 
 
 
Mark-10 TSTM and TSTMH Motorized Torque Test Stands
Mark-10 >> Test Stands >> Manual Test Stands
Mark-10 TSTM / TSTMH Motorized Test Stands
Mark-10 TSTM Test Stand
Mark-10 TSTM / TSTMH Motorized Test Stands
Mark-10 TSTMH Test Stand

Mark-10 TSTM / TSTMH Motorized Torque Test Stands
Price: $3515
Shipping Weight: 40 lbs
currently in stock
estimate shipping cost
FREE UPS Ground Shipping with ANY Mark-10 Purchase!
(48 continental US states only)

Model:  

Digital Angle Indicator (TST001), Add $902
Overload Protection Module (11-1042), Add $185
Set Point Cable - Gauge to test stand (09-1090), Add $137
Communication Cable - travel display to Mitutoyo (TSF002), Add $190

Compare all the Mark-10
Test Stands

Click here

carry the CE mark to comply with European conformance regulations.

FREE UPS Ground Shipping with any Mark-10 purchase!Now available with an optional digital angle indicator!

The Mark 10 TSTM Motorized Torque Measurement Test Stand is ideal for a wide variety of torque testing applications up to 100 lbin, including closure torque testing, fastener torque testing, and more. Motorized clockwise and counterclockwise rotation allows for highly precise and repeatable tests. Versatile modular design allows the stand to be configured for a variety of torque sensors and gripping fixtures while a lever-operated slider with travel stops makes engaging and disengaging samples quick and efficient. The stand includes a torque loading plate with tapped holes for grip and custom fixture mounting and a resetable angle indicator.

Available in vertical and horizontal orientations.

Features / Specifications:

  • Maximum load: 100 lb-in (11.3 Nm)
  • Speed range: 0.3-8.6 RPM (4-52°/s)
  • Speed accuracy: ±5% of setting
  • No speed variation with load
  • Maximum angular travel: no limit
  • Throat: 4.10" (104 mm)
  • Manual adjustment: 12°/knob rev
  • Angle dial with 2° resolution (optional digital angle indicator has 0.1° resolution, see below)
  • Maximum slider travel: 15.5" (394 mm)
  • Slider travel rate: 1.047" (26.6 mm) / lever rev
  • Line voltage: 80-240 VAC 50/60 Hz
  • The TSTM / TSTMH is supplied with a wrench set

Optional Equipment

  • Series STJ Universal torque sensors - Mount directly to the TST. A wide range of capacities is available. Mark-10 TSTM / TSTMH Motorized Test Stands  - Digital angle indicator
  • Force/torque gauge - The BGI displays the torque readout of the STJ sensor
  • BGI mounting kit - For securing the BGI to the column. Height adjustable.
  • Digital angle indicator (shown right) - Displays cw or ccw angle in 0.1° resolution for approximately 278 rotations, resettable with "zero" button. Accurate to ±0.7°. Includes backlight. Three sets of mounting holes allow the indicator to be mounted perpendicular to, or parallel to the test stand column. It can also be repositioned along the column. Rugged aluminum housing.
  • Jacobs chuck grip - Universal grip for samples or custom fixtures. Available in capacities of 1/4", 3/8", and 1/2". Mounts to the torque plate.
  • Closure grip - Universal grip for closures up to 4.8" dia.
  • Overload protection module - Protects against accidental overloads during motorized tests. Adjustable from 20 - 110% of the sensor's capacity.
  • Set point cable - Stops test stand rotation at programmable high and low set points for clockwise and counterclockwise torque. Requires the BGI.
  • Custom modifications - Special modifications are available, including custom-designed fixtures, increased column length, and more.
Model Capacity x resolution Price
TSTM Test stand, motorized, 500 lb, vertical, 110V $3515
TSTMH Test stand, motorized, 500 lb, horizontal, 110V $3515
TST001 Digital angle indicator for TST-Series stands $902
TSFM002 Limit switch kit for TSFM500 / TSFM500H $380
11-1042 Overload protection module, gauge to test stand $185
09-1090 Cable, set point, gauge to test stand $137
TSF002 Horiz. / wall mounting kit for TSF Series and TST Series stands $190

Dimensions:

TSTM:
Mark-10 TSTM / TSTMH Motorized Test Stands

TSTMH:

Mark-10 TSTM / TSTMH Motorized Test Stands

Top


Home | Site Map | Shopping Cart | Store Policies | Your Account

Force-Gauge.net - an Itin Scale Company
4802 Glenwood Rd.
Brooklyn, NY  11234
Phone: (718) 336-5900
For orders phone 800-832-0055
FAX: (718) 627-1313


©2002-2016 Force-Gauge.net, All rights reserved
Email sales@force-gauge.net with comments or questions about this site